Contact Us

Study on Performance of Quarry Dust as Fine Aggregate in

Mar 07, 2018 Properties of concrete using quarry dust as fine aggregate and coconut shell as coarse aggregate were examined. Hot rolled and cold formed

The Utilization of Quarry Dust as Fine Aggregates in Concrete

quarry dust, which is a waste product from quarry, as fine aggregates in traditional concrete. During the tenure of the study, some physical and engineering properties of quarry dust and sand were determined and compared. The compressive strength of concrete was determined after replacing sand with quarry dust in various ratios.

High Performance Concrete using Quarry dust as Fine aggregate

water curing. The results were compared with concrete containing sand as fine aggregate and quarry dust as fine aggregate. 3.3 Compression test As per IS 9013:1978 compression test was carried out on cube specimen. The compression test is carried out on specimens cubical or cylindrical in shape. The cube specimen is of the size10 x10 x 10cm.

Use of Quarry Dust as fine aggregates by Partial

Keywords: Quarry dust, Sand, Concrete, Compressive strength. INTRODUCTION:- Quarry dust is a byproduct of the crushing process which is a concentrated material to use as aggregates for concreting purpose, especially as fine aggregates. In quarrying activities, the rock has been crushed into various sizes; during the process the dust generated

Feasibility of Quarry Dust to Replace River Sand as Fine

concrete with quarry dust as fine aggregate. Keywords: Concrete, Fine aggregate, Quarry dust, River sand, Compressive strength, Shrinkage, Workability. 1. Introduction Concrete is one of the most widely used building materials in construction. It is a composite building material made of cement/binder and

Partial Replacement of Fine Aggregates with Quarry Dust

Powder (CPR)/Quarry dust (QD) as fine aggregate in cement concrete, replacing natural sand. The study on concrete includes determination of compressive strength and split tensile strength of different grades of concrete. Properties of aggregate affect the durability and performance of concrete, so fine aggregate is an

What are the advantages of using quarry dust as fine

The concept of replacement of natural fine aggregate by quarry dust which is highlighted in the study could boost the consumption of quarry dust generated from quarries. By replacement of quarry dust, the requirement of land fill area can be reduc...

(PDF) EXPERIMENTAL STUDY ON REPLACEMENT OF FINE

This work is related to study the compressive strength of concrete using quarry dust as fine aggregate instead of sand and 10mm washed aggregate instead of

Introduction to Quarry-Dust as Partial Replacement

May 19, 2020 quarry dust as fine aggregate: effect on compressive strength,durability and workability of concrete. The experimental study done by R Chandana Sukesh, Katakam Bala Krishna, P.Sri Lakshmi Sai Teja, S.Kanakambara Rao.[6] in which replacement of the sand with quarry dust shows an improvement in the compressive strength of the concrete.

Analysis of Concrete Made from Quarry Dust

cement, fine aggregate, coarse aggregate, quarry dust. The examples were casted for M25 grade of concrete by supplanting the cement 0%, 5%, 10%, 15% and 20% by quarry dust and tested for workability by slump test, compressive strength, flexure strength and split tensile test at the age of 7, 14, 28 and 50 days.

Partial Replacement of Fine Aggregates with Quarry Dust

Powder (CPR)/Quarry dust (QD) as fine aggregate in cement concrete, replacing natural sand. The study on concrete includes determination of compressive strength and split tensile strength of different grades of concrete. Properties of aggregate affect the durability and performance of concrete, so fine aggregate is an

Feasibility of Quarry Dust to Replace River Sand as Fine

concrete with quarry dust as fine aggregate. Keywords: Concrete, Fine aggregate, Quarry dust, River sand, Compressive strength, Shrinkage, Workability. 1. Introduction Concrete is one of the most widely used building materials in construction. It is a composite building material made of cement/binder and

High Performance Concrete using Quarry dust as Fine

water curing. The results were compared with concrete containing sand as fine aggregate and quarry dust as fine aggregate. 3.3 Compression test As per IS 9013:1978 compression test was carried out on cube specimen. The compression test is carried out on specimens cubical or cylindrical in shape. The cube specimen is of the size10 x10 x 10cm.

Use of Quarry Dust as fine aggregates by Partial

Keywords: Quarry dust, Sand, Concrete, Compressive strength. INTRODUCTION:- Quarry dust is a byproduct of the crushing process which is a concentrated material to use as aggregates for concreting purpose, especially as fine aggregates. In quarrying activities, the rock has been crushed into various sizes; during the process the dust generated

Use of Quarry Fine as Partial Replacement of Concrete as a

Ilangovana et al., [12] studied the strength and durability properties of concrete containing quarry dust as fine aggregate and found that the compressive, flexural strength and durability studies of concrete made with quarry rock dust were nearly 10% more than the conventional concrete.

Studies on Quarry Dust as Partial Replacement of Fine

1. Quarry dust can be used as a finer material which can reduce the voids in concrete. 2. Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory. 3. From the above results 15% replacement of quarry dust gives high Compressive and Flexural Strength. 4. By using quarry dust wastes instead of conventional

Use of Quarry Fine as Partial Replacement of Concrete as a

Concrete with quarry dust as fine aggregate In a study in Thailand by Khamput [11] on the compressive strength of concrete using quarry dust as fine aggregate and mixing with admixture type E, it was found that with 70% quarry dust the concrete produced compared well with normal concrete.

Study on Partial Replacement of Fine Aggregate by Quarry

replacement of fine aggregate replacements varies as 0,25,50,75% of riversand. The study explains that quarry dust has required properties of fine aggregate and 50% of quarry dust can be replaced in sand to produce optimum strength of concrete. 25% replacement of quarrydust with fine aggregate gives same strength values as control mix

STUDY OF PARTIAL REPLACEMENT OF FINE AGGREGATE BY

Quarry dust can be an economic alternative to the river sand. It is a waste obtained during quarrying process. It has very rece ntly gained good attention to be used as an effective fi ller material instead of fine aggregate. In the present study, the hardened and durable properties of concrete using quarry dust were investigated. Figure 4.

Effect of quarry rock dust on the flexural strength of

Jun 01, 2018 Portland limestone cement, river sand and quarry rock dust both of 2 mm maximum size as fine aggregate, and 14 mm crushed rock coarse aggregate were used for the concrete The particle size distribution and the physical properties of the fine and coarse aggregates are shown in Fig. 1 and Table 1 respectively. The fine and coarse aggregates

Concrete with ceramic waste and quarry dust aggregates

Fresh ceramic waste coarse aggregate and quarry dust fine aggregates concrete more less cohesive and workable than conventional concrete because high water absorption of ceramic waste and quarry dust aggregates. However, the slump test result is still in designed range that is between 30 60 mm. The compressive strength for ceramic coarse

Effect of Quarry Dust on High Performance Concrete

Quarry Dust as full replacement in concrete as possible with proper treatment of Quarry Dust before utilization. Quarry waste fine aggregate was used in presence of silica fume. The overall test results revealed that quarry waste fine aggregate can be utilized in concrete mixtures as a good substitute of natural sand.

Research Article Study on Compressive Strength of Quarry

Research Article Study on Compressive Strength of Quarry Dust as Fine Aggregate in Concrete K.ShyamPrakash 1 andCh.HanumanthaRao 2 Department of Civil Engineering, PVP Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India

Quarry Dust Uses in a Construction Project Concrete Blocks

Jun 06, 2016 The reduction in the sources of sand and the need to reduce the cost of construction projects has resulted in the increase need to identify alternative construction materials to sand as fine aggregates in the construction projects. Quarry dust a by- product from crushing process during quarrying activities is good alternative during construction

EXPERIMENTAL STUDY ON REPLACEMENT OF FINE

concrete. The water absorption of Quarry Rock Dust concrete is slightly higher than Conventional Concrete. Joseph O Ukpata et al. (2012): The workability of concrete using lateritic sand and quarry dust as fine aggregates was found to have the same trend with normal concrete. The density of hardened concrete using lateritic sand and quarry dust

Quarry limestone dust as fine aggregate for concrete CORE

In this process waste fine aggregates (dust waste) are generated. The disposal of this type of waste is a further cost in the extraction process, but also a possible cause of environmental pollution (e.g. leaching into water reserves, atmospheric pollution as a result of small particles causing respiratory diseases or deposited on plants

Effect of Quarry Dust on High Performance Concrete

Quarry Dust as full replacement in concrete as possible with proper treatment of Quarry Dust before utilization. Quarry waste fine aggregate was used in presence of silica fume. The overall test results revealed that quarry waste fine aggregate can be utilized in concrete mixtures as a good substitute of natural sand.

I am using quarry dust (fine like cement) as a partial

It is good to be creative and to think outside the square. However there are sometimes that things have been done a certain way for a long time for a good reason. The problem is that using what I would call "crusher dust" or "crusher fines" will

Use of Quarry Fine as Partial Replacement of Concrete as a

Concrete with quarry dust as fine aggregate In a study in Thailand by Khamput [11] on the compressive strength of concrete using quarry dust as fine aggregate and mixing with admixture type E, it was found that with 70% quarry dust the concrete produced compared well with normal concrete.

STUDY OF PARTIAL REPLACEMENT OF FINE AGGREGATE BY

Quarry dust can be an economic alternative to the river sand. It is a waste obtained during quarrying process. It has very rece ntly gained good attention to be used as an effective fi ller material instead of fine aggregate. In the present study, the hardened and durable properties of concrete using quarry dust were investigated. Figure 4.

Concrete with ceramic waste and quarry dust aggregates

Fresh ceramic waste coarse aggregate and quarry dust fine aggregates concrete more less cohesive and workable than conventional concrete because high water absorption of ceramic waste and quarry dust aggregates. However, the slump test result is still in designed range that is between 30 60 mm. The compressive strength for ceramic coarse

Quarry Dust Uses in a Construction Project Concrete Blocks

Jun 06, 2016 The reduction in the sources of sand and the need to reduce the cost of construction projects has resulted in the increase need to identify alternative construction materials to sand as fine aggregates in the construction projects. Quarry dust a by- product from crushing process during quarrying activities is good alternative during construction

XRD Analysis of Natural sand, Quarry dust, waste plastic

Jan 01, 2018 It can be concluded from the test results that the addition of alternative fine aggregate material such as quarry dust along with waste plastic in concrete can be a potential application for mass concreting works in order to 1438 B.V.Bahoria/ Materials Today: Proceedings 5 (2018) 1432–1438 reduce the river sand depletion.

Comparing the Compressive Strengths of Concrete Made

on sand as fine aggregate and quarry dust as fine aggregate as well, also the concrete derived from them were tested in their fresh and hardened states. Below are presentation of data and a detailed discu ssion on t he results obtained. The analysis is carried out in tables and graphs shown below. 180 ILNS Volume 20

Experimental Study on Use of Quarry Dust and Fly Ash with

aggregates. In this experimental study an attempt will be made to find the effect of partial replacement of Fine aggregate by Quarry Dust and Cement by Fly ash. The innovative use of Quarry Dust in concrete formulations as a fine aggregate replacement in the range of 0%, 15%, 30% & 45% by weight for M-40 grade cement (PPC).

Experimental Study on Concrete and Cement Plaster Using

concrete containing quarry dust as fine aggregate along with organic inhibitors namely Triethanolamine and Diethanolamine at 1%, 2%, 3% and 4% by weight of cement. The optimum percentage addition of the organic inhibitors by weight of cement in concrete containing quarry dust as fine aggregate was also determined. Er. Lakhan

CiteSeerX — Strength and durability properties of concrete

Usually, Quarry Rock Dust is used in large scale in the highways as a surface finishing material and also used for manufacturing of hollow blocks and lightweight concrete prefabricated Elements. Use of Quarry rock dust as a fine aggregate in concrete draws serious attention of researchers and investigators.

Improved Concrete Properties Using Quarry Dust as

Apr 08, 2015 APPLICATIONS 1) The quarry dust is widely used in construction industry. 2) Quarry dust is used as a fine aggregate in Concrete for paving blocks of good permeability capacity and high grade concrete productions. 3) Quarry dust gives better workability and strength when it is mixed with the ingredients like fly ash, in concrete.